Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Austin?
Metal roof installation in Austin, TX typically runs $15,000 – $40,000 for a standard single-family home in 2026, with most projects landing around $22,000 – $28,000 for a 1,800 – 2,200 square foot roof using standing seam panels. The price depends on roof pitch, panel profile, tear-off of the old roof, and which part of the metro you live in. You can get an exact number before any work starts; we put it in writing.
Here’s the short version if you’re skimming:
- Average cost in Austin: $15,000 – $40,000
- Per square foot: $9 – $18 installed, depending on panel type and roof complexity
- Standing seam: $14 – $20 per square foot
- Corrugated or ribbed panels: $9 – $13 per square foot
- Tear-off and disposal of old roof: $1.50 – $3.50 per square foot, added to the total
- Timeline: 2 – 5 days for most single-family homes in the Austin area
We’ll walk through the full breakdown below, including what drives the number up or down and where homeowners in neighborhoods like Circle C, Mueller, or Pflugerville can expect to land. If you want a written price for your specific house, call (325) 225-5429 and we’ll come measure it.
Metal Roof Installation Cost Breakdown (2026)
Here’s what a metal roof job in Austin costs, line by line. These ranges reflect what we see across Travis, Williamson, and Hays counties in 2026.
| Line Item | Typical Cost Range (Austin Market) |
|---|---|
| Tear-off and disposal of existing roof | $1.50 – $3.50 per sq ft ($3,000 – $7,500 for a 2,000 sq ft roof) |
| Underlayment (synthetic or high-temp peel-and-stick) | $0.80 – $2.00 per sq ft |
| Standing seam panels (24 or 26 gauge, Galvalume or painted) | $7 – $12 per sq ft (materials only) |
| Corrugated / ribbed panels (exposed fastener) | $4 – $7 per sq ft (materials only) |
| Flashing, trim, ridge caps, and closures | $1.50 – $3.00 per sq ft |
| Labor (installation, incl. crew and equipment) | $3.50 – $6.00 per sq ft |
| Roof decking repair or replacement (if water-damaged) | $1.50 – $3.00 per sq ft, as needed |
| Permits and inspections (City of Austin / county) | $150 – $500, depending on jurisdiction |
Two factors move this number more than anything else: the panel profile and the roof’s geometry.
Standing seam is the premium option. The seams are mechanically locked and hidden, so there are no exposed screws or gaskets to age out. That’s why homeowners in Austin’s older central neighborhoods, places like Hyde Park, Travis Heights, or Allandale, tend to spend toward the $30,000 – $40,000 end. Corrugated and ribbed panels use exposed fasteners with rubber washers, a proven system that costs less up front but requires re-tightening and washer replacement every 10 – 15 years under Texas sun.
And the more hips, valleys, dormers, and pitch changes a roof has, the more cutting, measuring, and custom flashing the crew has to do. A simple 4:12 gable roof in Round Rock prices differently than a compound roof with three dormers in Westlake.
What Affects Metal Roof Installation Pricing in Austin
The same square footage can produce very different bids, and it’s not because one contractor is inflating anything. These are the actual drivers, in the order we watch them move a number:
- Roof pitch and height. Anything steeper than 7:12 slows a crew down and requires more safety equipment, including anchor points and harness lines. Two-story homes in neighborhoods like Steiner Ranch or Avery Ranch add staging time. A 4:12 single-story rancher prices lower because the crew moves faster.
- Existing roof condition and decking. If water has been getting under the old shingles, the OSB or plywood decking underneath may have soft spots. We won’t know until the old roof comes off, and a good contractor will have a written line-item rate per sheet for replacement so you’re not surprised. In Austin, after hailstorms sweep through areas like Cedar Park and Leander, we regularly find decking that looks fine from the attic but crumbles when exposed.
- Panel gauge and finish. 26-gauge is the standard for residential. 24-gauge costs more but resists oil-canning (visible waviness in flat panels) and holds up better against hail. Painted finishes like Kynar 500 carry 30 – 40 year fade warranties and add $1 – $2 per square foot compared to Galvalume.
- Tear-off versus overlay. Some roofers offer a metal-over-shingles option with purlins and a vapor barrier. It saves the tear-off cost, but Austin building code (following the 2024 International Residential Code, adopted with local amendments) requires a conditioned attic inspection and doesn’t allow it in every situation. We recommend full tear-off in most cases, because it lets us see the decking and correct any issues before the new roof locks them in.
- Neighborhood HOA requirements. Many Austin-area HOAs, including those in Mueller, Circle C, and Lakeway, have specific rules about roof color, profile, and finish. If the HOA requires a specific standing seam profile or a particular color from a particular manufacturer, the materials order gets more expensive.
- Permitting jurisdiction. The City of Austin, Travis County, Williamson County, and Hays County each have their own fee schedules and inspection timelines. A permit in Austin proper generally costs more than in unincorporated county land, and the inspection scheduling can add a day or two to the project.
One more thing worth saying plainly: a metal roof is a specialized installation, and the steep-slope and panel-handling work carries real risk. This is not a ladder-and-borrowed-hammer job. A trained crew with proper fall protection and panel-handling equipment is the difference between a roof that sheds rain for 50 years and one that leaks at the seams after two. We’d say that about any roofer, including ourselves.
How to Save on Metal Roof Installation
Saving money on a metal roof in Austin doesn’t mean cutting corners. It means making the right choices before the first panel gets ordered.
Choose corrugated panels where they make sense. If the roof is a simple gable on a single-story home in a neighborhood without strict HOA covenants, exposed-fastener panels deliver the same 40+ year lifespan as standing seam at about 30 – 40% less installed cost. The trade-off is the fastener maintenance every decade or so.
Time the project outside hail season. Austin’s hailstorms cluster from March through May. Roofing crews are slammed then, and prices tick up. Scheduling for late summer or fall, when demand eases, can save 5 – 10% and gets you a faster start date.
Get the decking inspected before you sign. If we can confirm the decking is sound during the estimate (through attic access and visible inspections), your written price won’t need a contingency line. The fewer unknowns on day one, the tighter the number.
Ask for the written price up front, and hold us to it. That’s how Penhallow Remodeling Austin operates under the Kingswell Way, a standard the Kingswell family of companies has followed since 2004. Every project gets a written price before any work starts, a defined arrival window, and a written guarantee. If the number on day one isn’t the number on the invoice, that’s not how we work.
We also offer free estimates. A crew lead will measure the roof, walk the attic, check the decking, and give you a written number you can hold us to. Call (325) 225-5429 to set that up.
Is a Metal Roof Worth the Cost in Austin?
Let’s answer that with numbers, not feelings, because it’s a fair question.
An asphalt shingle roof in Central Texas lasts 12 – 18 years before the sun and hail take their toll. A metal roof, properly installed, carries a 40 – 60 year lifespan. So over a 30-year window, you’re looking at one metal roof versus two, sometimes three, shingle replacements.
Run the math on a 2,000 square foot roof:
- Asphalt shingle replacement: $8,000 – $20,000 per installation, replaced every 15 years, equals $16,000 – $40,000 over 30 years (at today’s prices, not accounting for inflation).
- Metal roof: $15,000 – $40,000 once. And in many cases, insurance carriers in hail-prone areas offer premium discounts for Class 4 impact-rated metal panels.
There’s also the energy side. Metal roofs reflect more solar radiation than dark asphalt shingles, which matters in Austin where the sun doesn’t quit from June through September. A reflective metal roof can lower attic temperatures 20 – 40 degrees on a July afternoon, which means the air conditioner isn’t working as hard. That’s real money on an Austin Energy bill.
The honest answer: if you plan to be in the house five years or less, you may not recoup the cost. If you’re staying put, the numbers favor metal over the long haul. Our advice is always to see the written price, run your own math, and decide. No pressure from us.
Metal Roof Installation Timeline in Austin
A typical single-family metal roof takes 2 – 5 days from tear-off to final inspection, assuming reasonable weather and no major decking surprises. Here’s how it breaks down:
- Day One: Tear-off, decking inspection, underlayment installation. If we find decking rot, that adds hours to a day and a line item to the written price we already agreed on per sheet.
- Day Two: Panel layout and installation begins. The crew works from the eave up, cutting panels on the ground and lifting them with a panel conveyor where possible.
- Days Three – Four: Ridge caps, flashing, trim, and closures. This is the part that determines whether the roof leaks; the detailing matters more than the panel count.
- Final Day: Cleanup, magnet sweep for stray fasteners, walkthrough, and any final inspection scheduled with the permitting authority.
Larger homes, complex roof lines, or high-end standing seam systems can extend the timeline. If you’re replacing a roof on a two-story house in neighborhoods like Tarrytown or Westlake Hills, expect an extra day or two for scaffolding and lift logistics.
FAQs – Metal Roof Installation Cost in Austin
Is metal roofing more expensive than shingles in Austin?
Yes, roughly 2 to 3 times more. An asphalt shingle roof runs $8,000 – $20,000 for a standard Austin home, while metal runs $15,000 – $40,000. But metal lasts 40 – 60 years versus 12 – 18 for shingles in the Texas climate, so the per-year cost is actually lower. If you want the written numbers for your house, call (325) 225-5429 for a free estimate.
How much does a standing seam metal roof cost per square foot in Austin?
Standing seam runs $14 – $20 per square foot installed in the Austin market, including tear-off, underlayment, panels, flashing, and labor. Corrugated or ribbed exposed-fastener panels run $9 – $13 per square foot installed. The difference is the panel profile, hidden versus exposed fasteners, and the additional labor for seaming and locking the panels.
Can you install a metal roof over existing shingles?
Yes, technically, using a purlin system and vapor barrier. But we generally recommend against it for two reasons: it hides whatever damage may already exist in the decking, and Austin building code doesn’t allow it in all situations. A full tear-off lets us inspect and repair the decking before the new roof goes over it. We’ll be straight with you about which option works for your house.
Does a metal roof lower homeowners insurance in Texas?
Frequently, yes. Class 4 impact-rated metal panels are the industry standard for hail resistance, and many Texas insurers offer premium reductions for them. The amount varies by carrier and policy, so we recommend calling your agent and asking specifically about Class 4 metal roofing discounts before you commit. Call us at (325) 225-5429 and we’ll tell you which panel profiles carry that Class 4 rating.
How long does a metal roof last in Austin?
A properly installed metal roof lasts 40 – 60 years in Central Texas. The panels themselves can go longer than that; the points that age out are the fasteners, closures, and underlayment on exposed-fastener systems. Standing seam systems with hidden fasteners and Kynar 500 finishes are the most durable option for this climate. Whatever we install, the 365-Day Done Right Promise covers it in writing: if it fails inside the guarantee period, we come back and make it right at no charge.
What to Look for in an Austin Metal Roof Contractor
Trevor Nash, who leads Penhallow Remodeling Austin, will tell you the same thing he’d tell a friend: ask for the number in writing before the first truck shows up.
Here’s what that looks like in practice:
- A written price, not a verbal estimate. If a contractor won’t put the number on paper before work starts, walk away. The Kingswell Guarantee, in place since 2004, requires exactly that: a written price, a defined arrival window, and a written guarantee on every project. That’s not a sales pitch; it’s the bar we operate under.
- A written guarantee with teeth. Ours is the 365-Day Done Right Promise. If the work fails inside a year, we return and fix it at no charge. If a repair fails a second time, the second visit is free too, no service call, no re-inspection fee.
- Background-checked, uniformed technicians. You should know exactly who is walking onto your property. Every technician on a Penhallow job is background-checked and arrives in uniform. That’s standard operating practice, not a premium line item.
- A real person who answers the phone. Call us at (325) 225-5429 at any hour and a person answers. Not a voicemail maze, not a callback window. If you have a question about a metal roof at 10 p.m., you’ll reach someone who can help.
We also install metal roofs alongside our core home remodeling work. If you’re already planning a kitchen renovation or bathroom remodel, we can sequence the roof work so the disruption happens once, not twice. Trevor and the team at Penhallow Remodeling Austin handle Metal Roof Installation in Austin with the same written-price, written-guarantee standard we bring to every project.
Get a Written Metal Roof Price in Austin
If you’re in Austin, Round Rock, Cedar Park, Pflugerville, Georgetown, Lakeway, or anywhere in the surrounding metro, we’ll come out, measure your roof, check the decking, and hand you a written price. The number on day one is the number on the invoice. That’s how we work at Penhallow Remodeling Austin, and it’s been the standard since the Kingswell family of companies was founded in 2004.
Call (325) 225-5429 for a free estimate. Trevor Nash and the team will take it from there.
Pricing reflects the Austin market as of 2026. Penhallow Remodeling Austin offers free estimates – call (325) 225-5429.
Written by Trevor Nash, Owner at Penhallow Remodeling Austin, serving the Austin metro under the Kingswell Guarantee since 2004.
What Our Customers Say
"Full kitchen down to the studs. The written estimate held and they finished on the day they promised. Crew was tidy and polite the whole month. Rare to find."
- Vernon Askew"Primary bath remodel. They gave me a schedule and hit it, called me for every decision, and kept the dust contained with plastic. Beautiful tile work."
- Dana Monroe"Did our whole kitchen. The written estimate held, which after reading remodel nightmares online I did not take for granted. Showed up every morning on time and the crew was clean and polite."
- Warren Updike
