Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Kitchen Remodeling: The Austin Owner’s Guide
If you’re searching for Owens Corning kitchen remodeling in Austin, you’re likely dealing with a failing Owens Corning product in your kitchen, or you’re planning a remodel that involves Owens Corning materials. Penhallow Remodeling Austin installs and works with Owens Corning products, and a full kitchen remodel in Austin typically runs $14,000 – $45,000 depending on cabinet line, countertop material, and layout changes. Most Austin homeowners discover they need us when a backsplash substrate is soft behind the tile, an Owens Corning insulated wall panel has moisture intrusion, or the previous contractor’s work cracked within a year and the guarantee wasn’t worth the paper it was printed on.
Owens Corning is best known in kitchens for insulation, but the brand also makes building products that show up in kitchen remodels: insulated sheathing, wall panels, and acoustic insulation some Austin homeowners use between the kitchen and a bedroom or guest bath. When those products fail or get installed wrong, the fix usually means pulling cabinets, addressing the substrate, and reinstalling everything correctly. That’s the work we do.
Key takeaways:
- We install and replace Owens Corning kitchen products as part of a complete remodel, with written pricing before any work starts.
- Kitchen remodels in Austin run $14,000 – $45,000; smaller scopes like backsplash replacement run $800 – $2,500.
- Every job carries our 365-Day Done Right Promise in writing.
- Call (325) 225-5429 and a real person answers, 24/7.
Which Owens Corning Models This Applies To
Owens Corning doesn’t make a single “kitchen remodeling” product line, so the compatibility question depends on what’s actually in your kitchen. The most common Owens Corning products we encounter in Austin kitchens are FOAMULAR® rigid foam insulation board used behind exterior kitchen walls, Owens Corning fiberglass batt insulation in interior walls, and occasionally their acoustic insulation product in walls between the kitchen and a bedroom. Each has different thicknesses, R-values, and moisture handling characteristics, and the wrong one in the wrong spot causes exactly the failures that bring homeowners to us.
A quick way to identify what you have: FOAMULAR board is pink or sometimes green with printed branding and an R-value per inch (typically R-5 per inch). Fiberglass batts are pink with a paper or foil facing, and the facing has a product code printed on it. If the facing is torn, missing, or installed backwards, that’s a moisture problem waiting to happen. For acoustic insulation, Owens Corning uses a dense fiberglass or mineral wool product that looks different from standard batts. When we replace Owens Corning products, we match the spec to the application, not just to whatever was there before. That’s the difference between a fix that lasts 20 years and one that fails again in two.
We’re an independent Austin contractor, not affiliated with Owens Corning itself. But we install their products correctly and stand behind the work with our own written guarantee.
Styles & brands we work with
Signs Your Owens Corning Kitchen Remodeling Is Failing
- Soft or swollen drywall behind the backsplash or under a window. Moisture is getting through the wall assembly and the Owens Corning insulation or sheathing behind it is holding that moisture against the drywall. In Austin’s humid summers, this doesn’t dry out on its own. It gets worse until someone opens the wall.
- Musty smell in the kitchen that gets stronger when the AC runs. That’s usually a sign insulation inside the wall cavity has been wet at some point and is now holding organic growth. You can’t clean it from the front; the wall needs to be opened, the insulation replaced, and the moisture source fixed.
- Bubbling or peeling paint near the stove or sink, even though you run the vent fan. Trapped moisture is pushing through the wall finish. The vent fan handles surface steam, but if the wall assembly behind the drywall wasn’t done right on the original install, the moisture comes from inside the wall.
- Tile grout cracking repeatedly in the same line, especially on an exterior kitchen wall. Kitchen walls in Austin expand and contract with the temperature swing between August afternoons and January nights. If the substrate behind the tile wasn’t installed with the right Owens Corning product or the right fastening schedule, that movement shows up as cracks that keep coming back after every repair.
- The kitchen is noticeably warmer or colder than the rest of the house. That tells us insulation is either missing, compressed, or installed with gaps. Owens Corning products only perform to spec when they fill the cavity completely. A gap of an inch can cut the effective R-value by more than half.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Austin, a full kitchen remodel that includes replacing Owens Corning products and addressing whatever failure brought you to us runs $14,000 – $45,000. A smaller scope, like opening one wall to replace failed insulation and reinstalling cabinets and backsplash, usually falls in the $9,000 – $20,000 range. Pure backsplash replacement with the substrate correction behind it runs $800 – $2,500.
What drives the number up or down is scope: how many walls we’re opening, whether cabinets need to come out and go back in, what countertop material you choose, and how long the moisture problem has been running. The longer it’s gone unnoticed, the more framing repair is involved. Austin’s humidity means a small leak near a window can quietly damage a stud bay over two or three years before you see a single symptom.
Every quote from Penhallow Remodeling Austin is a written number before work starts. The price on day one is the price on the invoice. If we open a wall and find more damage than expected, we stop and tell you before any change is made. That’s The Kingswell Way, and it’s been how we operate since 2004. Each Penhallow location is independently owned and operated.
DIY or Call Us?
Honestly, most of this work is not a DIY project. Opening a kitchen wall means dealing with whatever’s behind it: wiring, plumbing, possibly asbestos if the house was built before the mid-1980s. Cutting into an exterior wall without addressing the vapor barrier correctly makes the original problem worse. And if you’re replacing Owens Corning fiberglass insulation, the dust is an irritant you do not want in your lungs without proper PPE and containment.
What you can do safely: check the brand markings on any exposed insulation you can see (usually in the attic above the kitchen or inside an open cabinet void), note whether you see staining or moisture, and take photos of problem areas so we can assess what we’re dealing with before we arrive. That saves time and gives you a head start on knowing the scope. But once the work involves opening walls, pulling cabinets, or touching electrical, call (325) 225-5429. Tell me what you need, I’ll tell you what it costs, and we’ll go from there.
We also work with KraftMaid and Cambria cabinetry and Silestone countertops, so if we’re already opening walls, we can handle the rest of the kitchen while we’re in there.
FAQs
Owens Corning fiberglass batt insulation and FOAMULAR board should last the life of the home if installed correctly and kept dry. In Austin’s climate, the main threat is moisture intrusion from small leaks or condensation caused by an incorrectly installed vapor barrier. A dry, properly installed wall assembly should need no maintenance for 40-plus years. Call (325) 225-5429 if you suspect yours was installed wrong.
Yes, in many cases. If the damage is limited to one wall or a single cavity, we can open the affected area, replace the Owens Corning product, repair the substrate and drywall, and reinstall your existing cabinets and backsplash if they’re in good shape. Smaller scopes usually run $9,000 – $20,000 in Austin depending on how much wall needs to be opened. Call us for an exact written quote.
Most single-wall Owens Corning repairs take three to five working days, including drywall repair, paint prep, and reinstall of cabinets and backsplash. A full kitchen remodel with insulation replacement across multiple walls typically runs four to eight weeks depending on cabinet lead times and countertop fabrication. We give you a defined arrival window and a schedule in writing up front.
We stock standard sizes of Owens Corning R-13 and R-15 batt insulation and common thicknesses of FOAMULAR board on our vehicles, so we can start most repairs on the first visit. If your job needs a specific density acoustic product or a non-standard board thickness, we source it from our supplier in Austin and typically have it within two business days. Call (325) 225-5429 and ask Trevor what’s on the truck this week.
Written by Trevor Nash, Owner, Penhallow Remodeling Austin at Penhallow Remodeling Austin, serving Austin and nearby areas.
