KraftMaid Bathroom Remodeling Nationwide

KraftMaid Bathroom Remodeling: The Austin Owner’s Guide

We handle KraftMaid bathroom remodeling at the part level. A full KraftMaid vanity replacement, cabinet swap, or door/drawer refit in Austin typically runs $9,000 – $28,000 installed, depending on cabinet line and how much of the surrounding tile, plumbing, and counter work has to move with it. Most owners discover they need us when a hinge tears out of the cabinet face, a drawer slide shears, or the finish on a KraftMaid vanity has blistered from years of Austin humidity and shower steam. The fix usually starts with matching the right KraftMaid part or replacing the cabinet run entirely, and we stock common KraftMaid hinge, slide, and door hardware on the truck so a site visit often turns into a completed repair the same day.

Call (325) 225-5429

Which KraftMaid Models This Applies To

KraftMaid builds across several cabinet lines, and compatibility is not always obvious from the outside. The Venicia, Presidio, and Durham lines each use different hinge mounting patterns and slide lengths, and a door from one line will rarely hang correctly on a cabinet from another. The most reliable way to identify your cabinet is the white KraftMaid label on the interior side of the drawer box or the back of the door, which lists the cabinet series and a manufacturing date. If that label is gone, we measure the hinge cup diameter (35 mm is standard on most KraftMaid lines, but a few older runs used 26 mm) and the drawer slide length, which is typically 18 or 21 inches. For Austin homeowners with older KraftMaid cabinets from the 1990s and early 2000s, we often recommend quality aftermarket hinges and drawer slides from Blum or Salice instead of chasing obsolete OEM parts that KraftMaid no longer produces. The aftermarket hardware matches the original drill patterns, costs less, and often outlasts the factory originals under daily use. We’re an independent Austin service provider and not affiliated with KraftMaid, which means we’re free to recommend the part that actually works rather than the part a brand catalog says you should buy.

Signs Your KraftMaid Bathroom Remodeling Is Failing

• Cabinet doors sag or won’t close flush. The hinge plate has worked loose from the cabinet face, or the spring inside the hinge has lost tension. In Austin’s humidity swings, the particleboard around the hinge screws can soften over time, and tightening the screw alone won’t hold once the substrate gives way.
• Drawers stick, catch, or pull out at an angle. The drawer slide has bent, a ball bearing has dropped out of the race, or the mounting clip has snapped. This is one of the fastest fixes we do, but ignoring it usually means the drawer box itself gets chewed up and the repair cost climbs with it.
• The finish is peeling, bubbling, or discolored. KraftMaid’s thermofoil finishes on older vanities eventually delaminate from the MDF core when exposed to shower steam and Texas heat without a proper bathroom exhaust fan doing its job. This is a cosmetic failure, but it’s the one that pushes most Austin homeowners toward a full vanity replacement instead of a part swap.
• The vanity cabinet itself is swelling at the base or kickplate. Water from splashing or a slow supply-line leak has wicked into the cabinet box. Particleboard does not recover. We replace the cabinet and fix the source of the water, or the next cabinet does the same thing in six months.
• Screws won’t bite anymore. If a hinge or drawer slide screw just spins in the hole, the cabinet face material has broken down. Toothpicks and wood glue are a two-week fix. We drill, glue, and set a proper dowel or move the hinge plate to solid material, and it holds for years.

Replacement Cost & What’s Included

In Austin, a KraftMaid bathroom remodel runs $9,000 – $28,000 for the full job. A smaller project, like swapping a single vanity cabinet and rehanging the existing top, starts around $5,000 – $12,000. The price moves based on whether we’re replacing one cabinet or the whole run, the KraftMaid line you’re matching, whether countertop and plumbing have to be disturbed, and whether we’re pulling a permit (we do, and inspections are passed before we call the job done). Every quote includes the parts, the labor, the plumbing and tile work around the cabinets, and a written line-item price before we touch a single cabinet. Our 365-Day Done Right Promise covers the work in writing: if a hinge fails, a drawer binds, or the finish fails inside the guarantee period, we come back and fix it at no charge. No second invoice, no service call fee on a repair we should have gotten right the first time. The price on day one is the price on the invoice, and if a repair fails, the return visit is free.

DIY or Call Us?

Some things are worth looking at yourself. You can check whether a hinge screw is simply loose, whether a drawer slide is visibly bent, and whether the water staining on your vanity base is from a splash pattern or an actual leak. What we’d rather you not do is try to rebuild a cabinet face or hang a full KraftMaid vanity door set on your own. The hinges have a specific overlay measurement, the doors have to be adjusted in three planes, and getting it wrong means the door binds, the finish gets scraped, or the cabinet face splits and you’re buying a whole new door instead of a hinge. KraftMaid bathroom work isn’t inherently dangerous like a high-tension spring or live electrical, but the cost of a botched cabinet repair is real, and it’s usually more than the repair would have been. Call (325) 225-5429 if you’re looking at sagging doors, a drawer that fights you, or a vanity that’s been swelling for a while. Tell me what you need, I’ll tell you what it costs, and we’ll go from there.