Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Fence Installation: The Austin Owner’s Guide
Cambria fence installation typically runs $3,500 – $9,000 in Austin, depending on footage, post settings, and whether we’re pulling a failed section or starting fresh. We stock Cambria-compatible fencing materials on the truck and can usually have a crew out within a few days for a replacement or full run. Most Austin homeowners discover the problem the hard way: a post leans after a spring storm, a gate sags until it scrapes, or the bottom rail rots out where sprinkler overspray keeps it damp.
Which Cambria Models This Applies To
Cambria’s fencing line covers both privacy and semi-privacy panel styles, and the compatibility question usually comes down to two things: post dimensions and rail slot spacing. Cambria uses a 5×5 post profile with routed channels that accept ¾-inch-thick infill boards, and the panel width is standardized at 72 inches on center. Older Cambria runs from the mid-2000s used a shallower channel, so if your fence predates that shift, replacement boards will need to be planed down slightly or we’ll adapt the post caps. The practical way to confirm what you have is to measure the channel depth with a tape measure; anything under ½ inch is the older profile. We always recommend OEM Cambria components where the warranty still applies, but for out-of-warranty repairs, a quality aftermarket ¾-inch cedar or composite board fits the same channel and will hold up better in Austin’s wet-dry cycles than the original softwood.
Styles & brands we work with
Signs Your Cambria Fence Installation Is Failing
- Posts leaning at the base: In Austin’s clay-heavy soil, especially east of I-35, posts set without concrete collars heave and tilt within three to five years. The post itself is usually fine; the footing has failed.
- Boards pulling free of the channel: The routed slot on Cambria posts holds boards by friction and a single bead of adhesive. Once summer heat cycles dry the wood, that bead lets go and boards rattle loose.
- Gate dragging or won’t latch: This usually means the hinge-side post has tilted just enough to throw the gate out of square, or the gate frame itself has absorbed enough moisture to swell past its original clearance.
- Bottom rail rot along the drip line: Austin sprinkler systems are the culprit here more often than rain. Water hits the bottom rail at the same spot every cycle, and that constant moisture finds its way in.
- Black staining at post bases or board ends: That’s mold from trapped moisture, and it tells us the end grain was never sealed. Cambria’s factory treatment is decent, but cut ends left unsealed will wick water and discolor within two seasons.
Replacement Cost & What’s Included
For Austin, the installed range is $3,500 – $9,000. A partial repair, like pulling a single failed post or replacing a run of rotted infill boards, lands near the bottom of that range. A full straight-line run with new posts, concrete collars, composite boards, and hardware on an average Austin lot runs $6,000 – $8,000. The range shifts based on linear footage, post quantity, whether we’re removing old concrete footings, and board material. Every quote includes the tear-out, disposal, new materials, labor, and the written Kingswell guarantee. You’ll get a written price before any work starts, so the number doesn’t move once we break ground. The work itself is covered for 365 days. If something fails in that window, we come back and make it right at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Fencing is not high-tension work, but it is deeply annoying work when it goes wrong. A homeowner can safely inspect post lean with a level, check channel depth with a tape measure, and look for sprinkler overspray hitting the bottom rail. Where DIY goes sideways is the post pull. A rotted post buried in clay with an old concrete collar is a two-person, come-along-and-dig-bar job, and setting the new post wrong puts you right back where you started in three years. If the posts are solid and you’re just replacing a few boards, it’s manageable. If the posts have moved at all, call (325) 225-5429. We’ll come out, tell you what’s actually wrong, and give you a written number before anything gets scheduled. Tell me what you need, I’ll tell you what it costs, and we’ll go from there.
FAQs
A Cambria fence in Austin typically lasts 12 – 18 years on the boards and 20-plus on the posts, depending on soil drainage and sprinkler exposure. Our 365-Day Done Right Promise covers the installation work, and Cambria’s own material warranty applies to the components while active.
Yes, in most cases. If the posts are still true and the channel is intact, we can replace damaged boards, re-secure loose ones, and reset a gate in a single visit. If the posts have heaved or rotted, a full replacement of those footings is the only fix that lasts. Call (325) 225-5429 and we’ll tell you which situation you’re in.
A partial repair takes a day. A full straight-line run on a standard Austin lot takes two to three working days from first post removal to final gate adjustment. We set expectations in writing before we start, including the arrival window.
We keep ¾-inch infill boards, post caps, gate hardware, and 5×5 post stock in rotation on our trucks. If your fence needs the older channel profile or a specific composite color, we’ll order it and have it on site before we schedule the work. We’re an independent Austin contractor, not a Cambria dealer, but we work with their components directly and know the line well.
Get Your Written Quote
If your Cambria fence is leaning, rotting, or coming apart at the channels, don’t wait until the next storm finishes the job. Call (325) 225-5429 and we’ll send a background-checked, uniformed technician to your Austin home, assess the fence, and hand you a written price before any work begins. No verbal ballpark that changes at the door. No pressure. Just a real number and a written guarantee behind it.
Written by Trevor Nash, Owner, Penhallow Remodeling Austin at Penhallow Remodeling Austin, serving Austin and nearby areas.
