Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Kitchen Remodeling: The Austin Owner’s Guide
A Blanco kitchen remodel in Austin typically runs $14,000 to $45,000 installed, depending on cabinet line, countertop material, and whether you’re replacing a single failed component or rebuilding the whole kitchen. We stock Blanco-compatible parts and match them to your existing model, so you’re not paying for a full replacement when a faucet cartridge or sink clip is the real problem. Most Austin homeowners discover the failure the hard way: a slow leak under the sink, a faucet that won’t stop dripping, or a Blanco sink that’s started to pull away from the countertop after years of Texas heat cycling.
We’re an independent Austin remodeling contractor, not affiliated with Blanco directly, but we install and source their products every week. If you’re staring at a failed Blanco part, call us at (325) 225-5429 and we’ll tell you what it costs to fix it before anyone picks up a tool.
Which Blanco Models This Applies To
Blanco makes three main sink lines we see across Austin kitchens: the Silgranit composite sinks, the stainless steel Performa and Diamond series, and the ceramic Durinox line. Each uses different mounting hardware and drain assemblies, and the parts are not interchangeable. A Silgranit PuraDur sink, for example, uses a different strainer basket and mounting clip than a stainless Performa sink, even if both measure 33 inches wide. That’s the biggest compatibility gotcha we run into: homeowners buy a universal drain kit or replacement clip online, then call us when it doesn’t seat properly.
The easiest way to identify what you have is to look under the sink. Blanco stamps the model number on a label attached to the underside of the basin, usually near the front lip. Write that down before you call us. For faucets, the series name is printed on the box, but if yours is long gone, we can usually identify it by the handle style and spout reach. In our experience, OEM Blanco parts are worth the premium for cartridge seals and mounting hardware because the tolerances are tighter. For drains and basket strainers, a quality aftermarket brass unit works fine and can save you $40 to $80. We’ll give you both options and let you decide.
Styles & brands we work with
Signs Your Blanco Kitchen Remodeling Is Failing
- Water pooling under the sink cabinet. This usually means the drain seal or the sink-to-countertop seal has failed. On Silgranit sinks, the composite expands and contracts with Austin’s temperature swings, and over 10 to 15 years that movement can break the silicone bond. Re-seating the sink with fresh sealant stops it, but you want it done before the cabinet base rots out.
- Faucet drips for 10 to 20 minutes after you shut it off. That’s a worn ceramic cartridge, which is the most common Blanco faucet failure we replace. The cartridge is a $30 to $60 part, but the job is inside the faucet body and requires the right removal tool or you’ll scar the finish.
- The sink flexes or creaks when you press on the rim. Blanco sinks are heavy, especially the Silgranit line. If the undermount clips have loosened or the counter wasn’t prepped right (we see this on some Austin remodels done without a proper support frame), the sink starts pulling down. This gets worse in homes with garbage disposals adding vibration.
- Mineral staining that won’t come off the Silgranit surface. Austin’s hard water leaves calcium deposits that etch the surface over time. A once-yearly descaling helps, but if the finish is already rough, you’re looking at professional resurfacing or replacement.
- Low water pressure from the Blanco faucet with no change at other fixtures. This usually points to a clogged aerator or a failing diverter. The aerator is a $9 part you can replace yourself. The diverter is deeper inside and usually worth a service call.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Blanco kitchen remodel in Austin runs $14,000 to $45,000, with the range driven by cabinet line (stock versus semi-custom), countertop material (quartz runs higher than laminate), and whether plumbing or electrical needs moving. If you’re only replacing a Blanco part, not the whole kitchen, here’s what we see: a faucet cartridge replacement runs $85 to $240 including the part and labor. A sink re-seating job runs $180 to $450 depending on the countertop material and how bad the old seal is. A full Blanco sink replacement runs $600 to $1,800 installed, including disconnect, removal, and new mounting hardware.
Every number we give you is written down before work starts. No verbal ballparks, no surprise change orders at the door. That’s the Kingswell Way, and it’s been the standard since 2004. You get a written price and a written 365-Day Done Right Promise: if the repair fails inside the guarantee period, we come back and fix it at no charge. We’ll also do a free second visit if needed, with no service call fee.
DIY or Call Us?
Here’s the honest split. You can replace a Blanco aerator or a drain stopper yourself with a pair of pliers and ten minutes. You can also descale a Silgranit sink with a non-abrasive cleaner. But anything involving the undermount clips, the ceramic cartridge inside the faucet body, or the sink-to-countertop seal is a job for someone who’s done it before. The clips are under tension, the faucet finish scratches easily, and a bad seal job means water in your cabinet for weeks before you notice. That’s the expensive fix we see too often in Austin: a $50 DIY attempt that turned into an $850 cabinet floor replacement. If it involves plumbing connections or weight-bearing hardware, call us at (325) 225-5429. Tell me what you need, I’ll tell you what it costs, and we’ll go from there.
FAQs
A Blanco Silgranit sink lasts 15 to 25 years in normal use, but Austin’s hard water and heat cycling can shorten that if the sink isn’t cleaned and re-sealed regularly. The composite itself won’t crack under normal use, but the mounting seal usually needs attention around the 10 to 15 year mark.
Small surface chips can be filled and color-matched, but a crack that goes through the basin wall is not repairable. The composite material doesn’t bond well once it’s fully cracked, and a failed repair will leak into your cabinet. Call (325) 225-5429 for an honest assessment; we’ll tell you if it’s salvageable before we ever schedule a replacement.
A faucet cartridge swap takes 45 minutes to an hour. A sink re-seating takes 2 to 3 hours including curing time for the sealant. A full sink replacement takes a half day. We give you a real arrival window before we show up, not a six-hour “sometime Tuesday.”
We keep common Blanco cartridges, aerators, and drain assemblies on the truck, and we can source anything else through our trade suppliers, usually within 2 to 3 business days. We also stock parts and materials for KraftMaid, Cambria, and Silestone products, so if your Blanco sink sits in a Cambria quartz countertop, we can handle the whole job without you chasing down parts from three different vendors.
Written by Trevor Nash, Owner, Penhallow Remodeling Austin at Penhallow Remodeling Austin, serving Austin and nearby areas.
