A Penhallow company - serving Austin, TX
An open living room and dining area after a whole-home remodel

Barrette Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Austin
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A low-threshold walk-in shower with a bench and grab bar
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Barrette Roofing: The Austin Owner’s Guide

Barrette roofing repair and replacement in Austin typically runs $400 – $1,800 for isolated damage and $8,000 – $20,000 for a full tear-off and new roof, depending on the size of the roof, the underlayment condition, and whether the decking needs rebuilt. We stock common Barrette-compatible fasteners, flashing, ridge caps, and sealants on our trucks so we can usually complete repairs without a second trip. Most Austin homeowners discover a problem after a heavy thunderstorm blows through and they spot a lifted corner, a missing shingle in the yard, or a water stain creeping across a bedroom ceiling.

professional installer leveling a stone shower niche shelf in bathroom renovation nationwide

Call (325) 225-5429

Barrette is best known as a building products manufacturer and distributor rather than a roof shingle brand, which matters more than you’d think when you’re hunting for a matching component. The roofing accessories sold under the Barrette name are typically drip edge, gable vents, ridge vents, and other metal trim pieces. If you have what you believe are Barrette shingles on the roof but the failing part is the metalwork around the eaves or the ridge, you don’t have to replace the whole roof to fix the failing component. If the shingles themselves are the failing part, the correct question is usually which shingle manufacturer and line is on the roof, and whether that line is still in production. We’ll address both situations here because Austin homeowners get burned either way.

Key takeaways:

  • Barrette roofing components in Austin are usually trim and ventilation products, not the shingles themselves, and we can replace just the failed part without tearing off anything else.
  • Repair pricing lands between $400 and $1,800 depending on roof pitch, access, and how much flashing or underlayment has to come apart.
  • Full roof replacement in Austin runs $8,000 – $20,000, and the right decision usually hinges on decking condition and remaining shingle life.
  • We write the price down before work starts, so the estimate you get on day one is the invoice you pay on the last day.

Which Barrette Models This Applies To

An open living space after a whole-home remodel

Barrette’s roofing and exterior trim lines include the Ridgemaster ridge cap shingle line, RapidFlow ridge vents, aluminum drip edge in a range of profile sizes, and gable and eave vents made for composition roofs. The Ridgemaster product is the one Austin homeowners most often have questions about, because it’s a trim line that sits at the highest point of the roof and takes direct sun and wind all year. The standard Ridgemaster profile measures roughly 10 inches by 11.5 inches and is made to lay over the ridge in single or double rows depending on the shingle’s exposure.

Identifying your Barrette part starts at the ridge or the eave. Ridge cap shingles have a distinctive flexible center groove that lets the cap bend over the roof peak. Metal drip edge carries a stamped marking on the underside in most cases, though years of Texas heat can fade that mark until it’s unreadable. When the marking is gone, our techs match by profile height, flange depth, and gauge. The compatibility gotcha with Barrette metal trim is the profile geometry: big-box drip edge is usually a simple L-shape with a 2-inch face, while Barrette’s heavier profiles have a deeper return lip that locks the shingle overhang in place. Substituting the wrong profile creates a gap at the fascia that Austin’s wind-driven rain will find every time.

We’re an independent Austin service provider, not affiliated with Barrette. That matters because we can repair the roof honestly and source the right match from either Barrette OEM product or a quality equivalent without a brand pushing us toward one answer. When Barrette OEM trim is available, we install it. When it isn’t, we match gauge, color, and profile with an equivalent that performs the same under Central Texas sun and storms.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Barrette Roofing Is Failing

  • Lifted or missing ridge cap after a storm: The flexible center groove on Ridgemaster cap shingles eventually hardens in the Texas sun, and once the material loses flexibility, wind gets under the edges. When one cap shingle lifts, the ones around it are usually close behind.
  • Rust bleeding down the fascia from drip edge: Galvanized drip edge holds up for years, but if the original installer scored the metal during installation, the cut edge rusts first. Austin’s humidity and occasional hail shorten that timeline.
  • Gable vent louvers separating or cracking: Barrette gable vents are painted aluminum or vinyl, and the aluminum versions take direct afternoon sun on west-facing gables. The paint fades, then the louver clips get brittle, and one good gust leaves you with a flapping vent.
  • Granule loss collecting in gutters: If the shingles themselves are shedding granules faster than normal each spring, the roof is near the end of its service life here. Austin’s heat bakes the asphalt base, and once the granules go, UV breaks the shingle down fast.
  • Water staining at the eaves inside the attic: This often points to drip edge that’s pushed out of position or a rotted fascia rail behind the metal. The failing part may be wood behind the Barrette trim, not the trim itself.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Barrette-related roof repair in Austin lands between $400 and $1,800 for most jobs. A straight ridge cap replacement on a single-story ranch with easy access runs toward the bottom of that range. A two-story house with a steep roof pitch, a rotted fascia rail behind the drip edge, or multiple failed vents pushes toward the top. Full roof replacement runs $8,000 – $20,000, with the spread driven by roof size, shingle line, decking replacement, and whether you need new underlayment to meet current code.

professional installer leveling a stone shower niche shelf in bathroom renovation nationwide

Every repair quote includes the parts, labor, disposal, and a written guarantee. We pull the permit when the job requires one, and the inspections get scheduled and passed before we call the job done. If anything we repaired fails inside the 365-day guarantee period, we come back and fix it at no charge. No service call fee, no re-inspection charge. We put that in writing on every job.

DIY or Call Us?

What an Austin homeowner can safely check from the ground: missing cap shingles, rust streaking on drip edge, loose gable vents, and granule buildup in downspout openings. Those observations help you describe the problem accurately when you call us. What gets dangerous: walking a roof with any pitch over a 4/12 after rain, working at the ridge line without fall protection, or prying up flashing at the eave while standing on a ladder placed on Austin’s shifting clay soil. Falls from ladders and roofs are the most common serious homeowner injury in this trade, and the hospital bill beats any repair quote.

If you’ve already got water showing inside, don’t wait on the repair. A $60 tarp is the only stopgap we’d tell you to do yourself, and even that depends on safe access. Otherwise, call (325) 225-5429 and we’ll get eyes on it, write the price down, and tell you exactly what failed, what it costs, and what we’ll do about it.

FAQs

A remodeled living room with built-in shelves around the fireplace

Getting started with Penhallow in Austin

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Austin team

A local crew that works across Austin and the towns around it, to the same written standard as every Penhallow location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Austin? Licensed & insured · Free written quotes response · free estimates
Call (325) 225-5429
Local Service Coverage

Request a Free Estimate in Austin

Tell us what you need - Penhallow Remodeling Austin responds fast. No obligation.

By requesting your free estimate, you agree to the terms of our Privacy Policy and consent to receive communications by phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch