Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Austin Owner’s Guide
Tremron bathroom remodeling in Austin typically runs $9,000 to $28,000 installed, depending on the size of the bathroom, whether you’re moving plumbing, and what materials you choose. If you’ve got a Tremron product in your bathroom that’s failing, whether it’s a paver floor that’s cracked around the edges, a shower base that’s settled, or a surround that’s pulling away from the wall, we can match the part and install it correctly. Most Austin homeowners discover a Tremron product problem the same way: water pools where it didn’t before, a tile or paver feels loose underfoot, or the grout keeps crumbling no matter how many times it’s re-applied.
We’re Penhallow Remodeling Austin, an independent remodeling contractor serving Austin. We’re not affiliated with Tremron, but we work with their products regularly, and we know how they behave in Central Texas heat and humidity. If you need a Tremron piece matched and installed, we’ll give you a written price before any work starts, and that price is the price on the invoice.
Which Tremron Models This Applies To
Tremron makes a range of concrete pavers, wall blocks, and hardscape products, and in bathroom applications we most often see their paver lines used for floors, shower bases, and occasionally accent walls. The compatibility question matters because Tremron pavers come in different thicknesses, typically 60mm for pedestrian applications and 80mm for areas that see heavier load or vehicle traffic. In a bathroom, the 60mm paver is the common choice, but we’ve seen 80mm units used in larger steam showers and on bathroom floors where the homeowner wanted a heavier, more substantial feel underfoot.
To identify your Tremron paver, flip it over or check the original order paperwork. Most Tremron products have a product code stamped or molded into the underside or edge. If the stamp has worn off, measure the thickness in millimeters and the face dimensions. Common Tremron paver sizes for interior use are the 4×8 and 6×9 formats, though their larger format slabs have made their way into some Austin remodels in recent years. One compatibility gotcha we run into often: Tremron’s color blends shift slightly between production runs, so if you’re replacing one or two pavers rather than the whole floor, we always recommend matching against a sample from a current batch rather than relying on the product name alone. The Texas sun fades interior-adjacent concrete faster than people expect, especially near south-facing windows.
OEM Tremron product is what we recommend for visible surfaces. For the substrate and setting materials underneath, we use industry-standard products that are widely available and proven in damp environments. Aftermarket substitutes for Tremron pavers exist, but the color variance and dimensional tolerance differences usually make them a poor choice when the replacement needs to sit flush with surrounding pieces.
Styles & brands we work with
Signs Your Tremron Bathroom Remodeling Is Failing
- Water pooling in one spot after every shower. This usually means the slope has failed or the substrate beneath the Tremron pavers has settled. In Austin’s expansive clay soils, substrate movement is the most common culprit we find under interior paver floors.
- Crumbling or disappearing grout between pavers. Concrete pavers expand and contract with temperature swings, and Austin’s 100-degree summer days followed by air-conditioned interiors put real stress on the grout joints. If grout keeps failing, the joint spacing is likely wrong for the paver size.
- A paver that rocks or clicks when you step on it. This is a setting bed failure, not a paver failure. The paver itself is probably fine; the material under it has washed out or broken down. Left alone, the paver will crack.
- Spalling or flaking on the paver surface. Concrete pavers in wet environments can spall if they were sealed with the wrong product or if standing water sat on the surface repeatedly. Tremron pavers are dense, but they’re not impervious to water chemistry and freeze-thaw cycles.
- Dark staining that spreads along the edges of the floor. Water is wicking up from below or draining incorrectly at the perimeter. This often points to a failed drain connection or missing waterproofing at the wall-floor junction.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Tremron bathroom remodeling project in Austin lands between $9,000 and $28,000. That range covers everything from a modest bathroom refresh with Tremron pavers on the floor and a new vanity, up to a gut-and-rebuild with moving plumbing, a custom walk-in shower, and higher-end fixtures. Here’s what drives the number up or down:
- Bathroom size. A 5×8 guest bath sits at the low end; a primary bath with separate tub and shower pushes toward the top.
- Plumbing changes. Moving a toilet drain or shower valve adds $1,500 to $4,000 depending on what’s behind the slab or in the wall.
- Material choices. Tremron pavers are an affordable flooring option, but pairing them with Cambria or Silestone countertops and Kohler or Moen fixtures moves the total upward quickly.
- Demolition scope. Removing an old mud-set floor versus a modern thin-set installation changes labor hours significantly.
Every quote we write in Austin includes the parts, the labor to remove and dispose of the old material, the substrate prep, installation, and a written warranty. If it’s not done right, we come back and make it right, covered under our 365-Day Done Right Promise. No change orders, no surprise line items at the end.
DIY or Call Us?
You can check a few things yourself: look for a product code on the underside of a loose paver, take photos of the layout from a few angles, and measure the room. That information helps us give you a faster, more accurate phone estimate.
But here’s where DIY goes wrong with Tremron products in a bathroom: the waterproofing layer beneath the pavers. If water has been getting under the floor, the setting bed is compromised, and simply pulling up a paver and re-gluing it won’t fix the problem. You’ll have a same-looking problem in six weeks. Setting pavers over a properly sloped, waterproofed substrate in a wet environment is not a weekend project. It’s also heavy work. Tremron pavers weigh 20 to 30 pounds each depending on size and thickness, and a bathroom floor has dozens of them. If you’d rather not spend a Saturday on your knees with a rubber mallet, call us at (325) 225-5429 and we’ll take a look.
FAQs
A properly installed Tremron paver floor in a bathroom should last 20 to 30 years in Austin’s climate. The pavers themselves rarely fail; what goes first is usually the grout, the sealer, or the substrate beneath them. We see most problems start around the 10 to 15 year mark in bathrooms that don’t have good ventilation or where the original substrate wasn’t sloped correctly.
It depends on the crack. A hairline surface crack can sometimes be sealed and stabilized if the paver isn’t moving. A crack that runs all the way through the unit means the paver has lost structural integrity and should be replaced. The good news: replacing one or two pavers is far less expensive than redoing the floor, and we can usually match the current Tremron production run closely. Call (325) 225-5429 for an exact quote, estimates are free.
A typical Tremron bathroom remodel in Austin takes 2 to 4 weeks from demo to final walkthrough. Smaller jobs where we’re swapping a few pavers and re-grouting can be done in 2 to 3 days. The timeline stretches when plumbing moves or when custom shower enclosures and countertop templating are involved. We’ll give you a defined arrival window and a written schedule before the work starts.
We keep the most common Tremron colors and sizes in our Austin inventory and can pick up less common products from local distributors, usually same week. If you’re matching an existing floor, we bring samples to your home before we order anything, so you see the color match in your own light before we schedule the installation.
Written by Trevor Nash, Owner, Penhallow Remodeling Austin at Penhallow Remodeling Austin, serving Austin and nearby areas.
