Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Driveway & Pavers: The Austin Owner’s Guide
Mr-Glass driveway and paver components in Austin typically cost $450 – $2,800 installed depending on whether you’re replacing a single cracked paver, a section of glass-fused edging, or re-bedding an entire inlay. We stock the common Mr-Glass paver sizes and glass-media finishes on the truck most weeks, and the swap itself usually takes a morning. Most homeowners discover a problem after a hard rain, when a paver shifts and the glass inlay catches a tire, or when the Texas sun finally bakes a hairline crack wide enough to hold water and freeze-spall the surface.
Which Mr-Glass Models This Applies To
Mr-Glass has produced three paver lines that turn up regularly in Austin driveways and walkways: the Lumina series (glass-inlaid surface pavers, 12×12 and 16×16 nominal squares), the Reflex line (glass-medallion accents set into standard concrete or Belgard paver grids), and the Borderglass system (12-inch-wide glass-fusion edging units sold separately from the field pavers). The compatibility gotcha we see most often: Reflex medallions are 14-inch octagons, not 16-inch squares, and a homeowner who measures the visible glass face instead of the paver body will order the wrong unit every time. Look for the mold stamp on the underside of any intact paver – it gives you the series letter (L, R, or B) and the production batch. That stamp matters more than the color name.
OEM Mr-Glass pavers are still available through specialty supply houses in Texas, but lead times run three to six weeks out of Houston or Dallas warehouses. For most Austin driveways, a quality aftermarket equivalent from Unilock or Belgard with a matching glass-media blend installs at roughly 60% of the OEM price and weathers identically in our climate. We’ll quote both options in writing so you can decide.
Styles & brands we work with
Signs Your Mr-Glass Driveway & Pavers Is Failing
- Tire hum or rattle when driving over a specific paver. The glass inlay has delaminated from the concrete body and is vibrating in its bed. Left alone, the glass starts spalling at the edges and the paver eventually craters.
- Water ponds around one paver after rain. The sand bed has washed out underneath – common in Austin’s flash-rain cycles – and the paver is beginning to rock. Each freeze-thaw cycle in a wet bed accelerates the problem.
- Hairline cracks spidering across the glass face. The glass was rated for pedestrian load but got installed in a wheel path, or the bedding layer was uneven from day one. Cracks that hold moisture will spread within a season.
- Glass color fading unevenly or turning milky. UV degradation from our sun is real, but uneven fading usually points to a sealant failure rather than the glass itself. One paver in a row milking up while neighbors stay clear is a replacement candidate.
- A paver sits proud of its neighbors by an eighth inch or more. The subgrade under that unit has heaved, which happens when clay soil expands after rain. Resetting one paver is a morning job; ignoring it turns into a tripping hazard and a cracked paver within a year.
Replacement Cost & What’s Included
In Austin, you should expect to spend $450 – $900 to replace a single Mr-Glass paver with a matching or near-match unit, including the paver, bedding sand, labor, and haul-off of the broken piece. A larger section – say, ten to twenty pavers or a Borderglass run along a walkway – lands between $1,400 – $2,800 installed. The range depends on three things: whether we can source an exact OEM match or need to blend an aftermarket equivalent, how much base repair the bed needs, and whether the glass-media color is current production or a discontinued batch that requires a custom match.
Every replacement comes with a written line-item quote before work starts, so the number you sign off on is the number on the invoice. We back the installation with our 365-Day Done Right Promise: if a replaced paver shifts, cracks, or delaminates inside the first year, we come back and fix it at no charge. That’s in writing, not a handshake.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Two things are safe to do yourself: take photos of the failed paver and its mold stamp, and clear debris from around it so water drains. Past that, this is where most DIY attempts go wrong. Pavers sit in a compacted sand and aggregate bed, and prying one out without disturbing the neighbor units takes feel and the right tools. Pull the wrong angle and you crack the paver next to it; undercut the bed and your replacement sits low within a month. Glass-inlaid pavers add another wrinkle – the glass face doesn’t flex, so a pry bar placed wrong shatters it and doubles your part cost. Call us at (325) 225-5429 and we’ll bring the right replacement, match the bed depth, and do it in a morning. The estimate is free and in writing.
FAQs
A properly installed Mr-Glass paver on a well-drained bed lasts 15 – 25 years in Central Texas. The weak points are the glass-to-body bond and the sand bed underneath, not the concrete body itself. If you’re on clay-heavy soil in an older Austin neighborhood, plan for bed touch-ups every 7 – 10 years. Call (325) 225-5429 if you want us to assess yours – the visit and estimate are free.
Surface hairline cracks can sometimes be sealed and stabilized with a glass-bonding resin, which buys you two to four years. But if the crack catches a fingernail or holds water after rain, the paver is beyond a worthwhile repair and should be swapped. We’ll tell you which category yours falls into before quoting anything.
A single-paver replacement runs about two to three hours from arrival to cleanup, including pulling the old unit, re-bedding the sand base, setting the new paver, and compacting. A section of ten or more pavers is a full day. We’ll give you a written arrival window before the job, not after.
We carry the common 12×12 and 16×16 Lumina sizes plus several glass-media blend colors in our Austin service inventory. If your specific batch or color is a discontinued or odd-run product, we’ll source the closest match or quote a custom glass blend before any work begins. Most single-paver swaps happen in one visit because we bring the part with us.
Call for a Free Estimate
If you have a cracked, rocking, or delaminating Mr-Glass paver in your Austin driveway or walkway, call us at (325) 225-5429. We’ll put a real number in writing before any work starts, show up in the window we gave you, and stand behind the repair for a full year. We also stock parts for KraftMaid, Cambria, and Silestone lines alongside our driveway and paver work. Penhallow Remodeling Austin is an independent service provider and is not affiliated with Mr-Glass. Tell me what you need, I’ll tell you what it costs, and we’ll go from there.
Written by Trevor Nash, Owner, Penhallow Remodeling Austin at Penhallow Remodeling Austin, serving Austin and nearby areas.
