Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Fence Installation: The Austin Owner’s Guide
Fence installation in Austin for homes with ECO Window Systems products typically runs $3,500 – $9,000 installed, depending on linear footage, material, and whether we’re pulling out an old fence line first. Most owners call us after a windstorm or a dry summer has left posts leaning, pickets split, or gate hardware sagging. We stock ECO Window Systems-compatible fence hardware on our trucks and can usually have a quote written up within a day of the first call.
Which ECO Window Systems Models This Applies To
ECO Window Systems builds window and door products, but many Austin homes with their windows also have fence lines that need work done right. Here’s the thing most homeowners don’t realize: fence installation around patios, garden walls, and pool surrounds often ties directly into the exterior trim and casing details ECO Window Systems products use. The compatibility question isn’t about the fence panel itself – it’s about the post spacing, gate frame depth, and hardware mounting points near exterior walls and window lines.
When we match parts, we measure the actual post diameter (typically 2-3/8″ or 2-7/8″ for residential chain link; 4×4 or 6×6 for wood), the gate hinge offset, and the hinge leaf thickness. If your ECO Windows were installed with specific trim profiles, we account for that clearance so gate brackets don’t scrape or bind against the casing. For ECO Window Systems specifically, the gate post-to-wall clearance is usually tighter than a standard fence run, which is why off-the-shelf hinge kits from big-box stores often don’t line up. OEM hardware from ECO is made for their window and door line, not for fencing – so we typically pair OEM window specs with quality aftermarket fence hardware from brands we trust, like PostMaster or Simpson Strong-Tie, which hold up better in Texas heat anyway.
Styles & brands we work with
Signs Your ECO Window Systems Fence Installation Is Failing
- Posts leaning away from window or door trim. This usually means the concrete footing wasn’t deep enough or the post wasn’t set below the freeze line. Austin’s clay soil expands and contracts hard through wet and dry cycles, and shallow footings get pushed around over time.
- Gate dragging or binding against ECO trim. Over the course of a Texas summer, wood swells, metal fatigues, and hinge screws loosen. If the gate only sticks after rain, the post has shifted; if it sticks all the time, the hinge leaf is bent or the frame has racked.
- Rust bleeding down the post onto the fence pickets. Austin’s humidity plus splashback from irrigation systems accelerates corrosion on cheap powder-coated hardware. Once the coating fails, water creeps between the post and the rail bracket, and that rust stain is usually the first sign.
- Boards cupping, splitting, or pulling away from the rail. Cedar and pressure-treated pine both move with moisture. When the original installer used nails instead of screws, boards pop loose after a few seasons of dry heat followed by heavy rain.
- Fence line leaning into your neighbor’s yard. Section-by-section lean means the stringers are rotted at the ends. In Austin’s older neighborhoods like Allandale or Crestview, we see this a lot where sprinklers hit the same spot every morning.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a typical Austin backyard, full fence installation lands between $3,500 and $9,000. A straight run of 150 linear feet in pressure-treated pine with steel posts usually sits around $4,800 – $6,500. Cedar adds about 20 – 30% to that. If you want metal posts with cedar pickets – a combination that outlasts all-wood construction in Texas heat – expect the higher end of the range.
Every quote includes demolition and haul-off of the old fence, post holes dug and set with concrete, all hardware, pickets or panels, and a final walkthrough. We give you a written price before any work starts, and if something isn’t right inside 365 days, the Done Right Promise means we come back and fix it at no charge. No change orders, no “we found rot and now it’s double” conversation. The number on day one is the number on the invoice.
DIY or Call Us?
You can check a few things yourself without touching a post hole digger. Look at whether posts are plumb with a $12 level, check hinge screws with a screwdriver, and note where irrigation heads are aimed. That’s the useful DIY part.
Here’s where it goes wrong: pulling posts, mixing concrete, and setting gates square against window and door trim. Austin clay fights back. Digging a 3-foot post hole this time of year is brutal work, and if you set the post wrong, you’ve spent a Saturday and you’re still looking at a leaning gate. Fence work doesn’t involve the high-tension danger of garage springs or electrical panels, but it does involve heavy lifting, concrete dust, and a gate that can swing hard if the hinges let go. If the gate feels like it’s fighting you, stop and call us. Trevor Nash and the crew have been fixing fence lines around Austin for well over a decade – we’ve pulled posts out of ground that was more rock than soil. Call (325) 225-5429 and we’ll tell you what you’re looking at.
FAQs
With steel posts and cedar pickets, you should get 20 – 25 years out of the structure before rot or rust becomes a problem. All-wood construction in Austin’s clay soil typically lasts 10 – 15 years before posts start to shift or rot at the base. The biggest lifespan killer isn’t heat, it’s irrigation water hitting the post line every day.
Sometimes. If one post has shifted but the stringers and pickets are still solid, we can reset the post in a deeper footing and swap the gate hinges without building a whole new line. But if more than a third of the posts are moving or the stringers are soft, a full replacement in the $3,500 – $9,000 range for Austin is usually the better spend.
Most Austin fence jobs take two to three days. Day one is demo and post setting, day two is stringers and pickets, and day three is gates, hardware, and a walkthrough with you. Weather in Austin can push that a day either direction.
Yes. Our trucks carry post brackets, hinge kits, gate latches, and tension bands sized for the post diameters we see most in Austin. For specialty hardware tied to your specific ECO Window Systems trim profile, we source it from our Austin supplier and have it on hand before the job starts. Call (325) 225-5429 and we’ll verify what you have and what you need.
Written by Trevor Nash, Owner, Penhallow Remodeling Austin at Penhallow Remodeling Austin, serving Austin and nearby areas.
