Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Austin Owner’s Guide
Boral roofing replacement in Austin typically runs $400 – $1,800 for repairs and $8,000 – $20,000 for a full roof replacement, depending on the specific Boral product line, roof pitch, and how much decking needs attention. We stock Boral-compatible concrete and clay tile, plus the underlayment, battens, and flashing that go with them, and can usually have a crew out within a few days of your call. Most Austin homeowners discover a problem the hard way: a tile cracked during a hail storm, a leak showed up on the ceiling after a wind-driven rain, or they spotted a slipped tile from the driveway weeks after the storm that did the damage.
Boral tile roofs are built to last decades, but the parts that hold them together age on a shorter clock. Underlayment breaks down, flashing pulls loose, and tile gets brittle under Central Texas sun. When one piece fails, water finds the gap fast. That’s the moment this page matters: you need to know exactly what you’re looking at, what a real fix costs in Austin, and who you can trust to do it right without turning a $600 repair into a $6,000 surprise.
Which Boral Models This Applies To
Boral Roofing manufactured concrete and clay roof tile under several well-known lines before their U.S. tile operations were acquired by Westlake Royal Roofing Solutions. In Austin, you’ll most often see Boral concrete tile in flat, low, and high profile shapes, plus clay tile in mission, Spanish, and flat styles. The model name is stamped on the underside of the tile: look for “Boral,” the plant code, and a date stamp. If the tile face is weathered but the back is clean, that stamp is your answer.
The compatibility gotcha with Boral tile is the profile match. A “flat” tile from one Boral line does not always interlock cleanly with a “flat” from a different plant or generation, and a 1/4-inch difference in the tile’s roll or nose will telegraph across a whole slope. When we repair a Boral roof in Austin, we match profile first, then color, then age. For older roofs where the exact tile is no longer made, we source quality aftermarket equivalents that match the original’s dimensions and interlocking profile, not just the color. OEM Boral tile still exists through Westlake’s distribution network for many lines, and we go that route whenever the budget allows. The question is whether a 20-year-old roof needs a $12 OEM tile or a $6 aftermarket match that blends in and buys you five more years. We’ll tell you which one makes sense.
Styles & brands we work with
Signs Your Boral Roofing Is Failing
- Water stains on ceilings or walls. This is the symptom, not the problem. Underlayment fails years before tile does, and water travels sideways before it drips. By the time you see the stain, the leak has been working for a while.
- Cracked or spalled tile faces. Freeze-thaw cycling is rough on concrete tile, especially along roof edges in Austin’s occasional winter ice events. A cracked surface tile lets water into the underlayment below.
- Tile slipping out of place. Wind gets under the tile course and lifts it. Once the nail or clip holding the tile fails, gravity and the next storm do the rest. You’ll spot a crooked row from the ground.
- Granular residue in gutters. Concrete tile sheds surface material as it ages. A little dust is normal; a heavy grit load every fall means the tile surface is breaking down faster than it should.
- Flashing lifting or cracking. The metal where the roof meets a chimney, wall, or valley is the most concentrated weak point on any Boral roof. Sealant dries out, metal expands and contracts, and water gets behind it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Patches and isolated tile repairs on Boral roofs in Austin typically run $400 – $1,800. That covers tile matching, underlayment repair in the affected area, re-bedding and pointing where needed, and a written guarantee on the work. If the leak has damaged decking or spread underneath a larger area of tile, the number goes up because we’re replacing structural material, not just the wearing surface.
A full Boral-style roof replacement in Austin runs $8,000 – $20,000. The spread comes down to four things: the tile profile you choose, the size and pitch of your roof, whether the existing decking can be reused, and how much flashing detail your roof has (valleys, chimneys, skylights all add labor). We write the price before any work starts, line by line, and that number is the number on your invoice. No change orders because we “found something” halfway through. If we miss something during the estimate, that’s on us, not you. That’s the Kingswell standard we’ve worked under since 2004, and it applies to every Boral job we do.
DIY or Call Us?
There are two things an Austin homeowner can safely do. First, from the ground with binoculars, look for slipped or cracked tiles and loose flashing. Second, during a rain, go into the attic with a flashlight and look for drips, stains, or damp decking. That’s the full list.
Walking a tile roof is where DIY goes wrong. Boral concrete tile is heavy and surprisingly slick when damp, and a misstep cracks more than the tile you came to fix. Working under the tile layer means pulling courses in the right order, not the convenient one, and re-bedding tile correctly is a skill that takes years to do well enough that it survives an Austin hail season. Trevor Nash and his crew have done this work across Austin for well over a decade, and we’ve fixed a fair number of DIY attempts that made the original leak worse. If you’re not sure what you’re looking at, call us, describe what you see, and we’ll tell you honestly whether it’s urgent. Tell me what you need, I’ll tell you what it costs, and we’ll go from there.
FAQs
A Boral concrete or clay tile roof in Austin’s climate typically lasts 40 – 50 years on the tile itself, but the underlayment beneath it generally needs replacement at the 20 – 25 year mark. The tile may still look fine while the waterproofing layer under it is quietly failing. If your Boral roof is past that age range and you’re seeing leaks, the repair may be more than a patch. Call (325) 225-5429 and we’ll help you figure out what you’re actually dealing with.
Yes, Boral tile roofs are repairable in most cases, especially if the issue is isolated tile damage, flashing failure, or a small area of failed underlayment. Full replacement only makes sense when the underlayment has failed across multiple slopes or the tile is spalling badly. We’ll write up the repair scope and price, and if replacement is the honest answer, we’ll tell you that too.
Most isolated Boral tile repairs and flashing replacements take one day from setup to cleanup. Larger underlayment repairs or re-bedding across a full slope typically run two to three days, weather permitting. We give you a defined arrival window before we start, and we leave the job site cleaner than we found it.
We keep common Boral concrete and clay tile profiles, matching underlayment, battens, and flashing materials on hand in the Austin area, and we source OEM or matched aftermarket tile for older profiles within a few days. Boral-branded tile is now distributed through Westlake Royal Roofing Solutions, and we order through that network when the job calls for exact OEM match. We’ll confirm material availability when we give you the written price.
Written by Trevor Nash, Owner, Penhallow Remodeling Austin at Penhallow Remodeling Austin, serving Austin and nearby areas.
