Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Austin Homeowners Choose Belgard Construction
Penhallow Remodeling Austin provides independent Belgard construction, paver, and retaining wall service across Austin, from Mueller to Circle C and up into Round Rock and Belgard repair in Cedar Park. We install and repair Belgard pavers, walls, and outdoor living products on the clay and limestone lots most Austin homes sit on, and we have been doing it long enough to know which Belgard lines hold up to Central Texas weather and which need extra base work before the first paver goes down. We are not an authorized Belgard dealer or factory service center. We are an independent contractor who works on Belgard products every week, and that independence means we recommend what serves your lot, not what clears a warehouse shelf.
Trevor Nash and our crew have served Austin homeowners for well over a decade. If you have had work done near South Congress, there is a fair chance our team left the jobsite cleaner than we found it. Call (325) 225-5429 for a written quote on any Belgard project or repair.
Key takeaways:
- Independent Belgard service and installation across Austin, with written pricing before work starts.
- We service and install Belgard Catalina, Mega-Arbel, Dublin Cobble, and Melville Wall lines.
- Paver driveways in Austin run $7,000 – $18,000; paver patios run $3,500 – $11,000.
- Every job includes the 365-Day Done Right Promise: if it fails, we come back and make it right at no charge.
- Call (325) 225-5429. A live person answers.
Why Trust Penhallow Remodeling Austin for Your Belgard Construction?
Belgard makes a solid product, but Austin soil does not care about a manufacturer’s spec sheet. Blackland Prairie clay expands when it gets wet and contracts when it dries, and that movement shows up as paver heave, edge creep, and wall block shift. Our crews have torn out enough failed paver jobs in this city to know that the paver matters less than what sits under it. That is the real difference between a Belgard patio that looks flat for ten years and one that develops a bowl after the first drought-to-flood cycle.
Trevor learned construction fundamentals at Los Angeles Trade-Technical College and spent years on foundation repairs and full kitchen rebuilds before bringing that trade discipline to Austin. He built Penhallow Remodeling on a simple idea: give the customer a real number on day one, then do exactly what you said you would do. That is why we write the price, the arrival window, and the 365-Day Done Right Promise into every Belgard job before any material lands on your driveway. Background-checked, uniformed technicians show up on time, and a live person answers the phone 24/7 if you need to reach us.
Styles & brands we work with
Common Belgard Construction Problems We Fix in Austin
- Efflorescence on darker Catalina pavers after a humid spring. That white chalky bloom is not a paver defect. It is moisture moving through the concrete, carrying salts to the surface. In Austin, where spring humidity hangs around and morning dew soaks everything, darker Belgard colors show it more. The fix is usually drainage, not scrubbing. If water has nowhere to go, the bloom comes back every spring.
- Edge creep on paver driveways after heavy rain. We see this a lot in neighborhoods built on slopes, like parts of Westlake and the hills west of 360. When the compacted limestone base was not keyed into existing concrete edges, water pushes against the paver field and the outside rows start drifting. Mega-Arbel driveways are especially prone because the units are larger and carry more surface load.
- Paver field cracks from insufficient joint sand. Austin’s expansive clay does not stay still. If joints between Dublin Cobble pavers are not filled and re-filled correctly, clay movement lifts individual units and cracks open along the row lines. The pavers are fine. The joint system failed.
- Melville Wall block chipping at corners. A base course that was out of level by half an inch creates pressure points as soil builds behind the wall. Over two or three wet seasons, the corner blocks take the stress and chip. We pull the course, re-level the base, and set the blocks back on a proper foundation.
- Standing water pockets in paver driveways. Mueller, for example, has newer construction and tightly graded lots, but any paver driveway with a skimped base will show low spots after the first real Texas rain. Water pools, then the clay under the base softens, and the problem compounds.
Belgard Parts & Our Repair-vs-Replace Approach
We use genuine Belgard pavers, edge restraints, and joint sand on repairs because color and texture match matters. A patch job with a lookalike paver in a slightly different grey or brindle tone will look wrong from the curb, and it only gets worse as UV fade sets in. When a discontinued Belgard color cannot be matched, we say so plainly and recommend a full-lot overlay rather than a mixed-brand patch that will look uneven forever.
We stock common Belgard Catalina and Dublin Cobble units locally in Austin, along with edge restraints and polymer joint sand, which keeps small repairs moving without a two-week lead time. For structural work, like a sunken paver field or a leaning wall section, we lift and re-lay the product rather than replacing what is still good. If the base failed, the paver did not. Call (325) 225-5429 and describe what you are seeing, and we will tell you whether it is a repair or a re-do before anything gets scheduled.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We look at the paver field, wall, or patio, check the base depth, joint sand level, and drainage path. For Belgard pavers in Austin, the base and drainage tell us more than the paver surface ever will.
- 2
Repair or install. For repairs, we lift the affected Belgard units, fix the base or edge restraint, re-lay the pavers in the same pattern, and fill joints with fresh sand. For new installs, we build the base to the lot’s drainage reality, not just the manufacturer’s minimum.
- 3
Test. We run water across the surface to confirm drainage, check for movement at edges, and walk the field to feel for rocking units.
- 4
Written warranty. Every Belgard job ends with a written guarantee and the 365-Day Done Right Promise. If anything fails inside that window, we come back and fix it at no charge. No service call fee, no re-inspection fee.
Belgard Products We Service & Install in Austin
We install and repair the Belgard lines most common in this market: Catalina pavers for driveways and patios, Mega-Arbel for larger-format driveway applications, Dublin Cobble for modular patio and walkway layouts, and Melville Wall blocks for retaining walls and raised beds, including Belgard in Georgetown. We also routinely install and service Belgard edge restraints, polymer joint sand, and base materials calibrated for Austin’s clay. We also work with vinyl fencing alongside paver projects, and while Belgard is a core specialty, we regularly install KraftMaid, Cambria, Silestone, and Kohler products on full remodel jobs.
See the difference
Before
After
Before
After
Before
AfterAuthoritative Belgard Pricing in Austin
Belgard hardscape pricing in Austin depends on square footage, base depth, access, and whether you are building new or repairing existing work. These are the ranges we quote most often:
| Project | Typical Austin Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
Smaller repairs, like re-leveling a sunken section, re-sanding joints, or replacing a cracked edge unit, typically run much lower. The best way to get a real number is a site visit. Call (325) 225-5429 for a free estimate. We put the number in writing before any work starts.
We Also Service These Brands
Belgard is a big part of what we do outdoors, but inside the house we are just as deep in KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures through our General Contractor services. If your project involves a paver patio and a kitchen refresh, one crew can handle both under one written quote and one set of guarantees.
FAQs – Belgard Construction Service in Austin
The white bloom is efflorescence, and it comes from moisture moving through the concrete and carrying salts to the surface. In Austin’s humid spring weeks, darker Belgard colors show it more. The long-term fix is drainage correction, not acid washing. If water has no escape route under the pavers, the bloom returns next spring even if you scrub it off today. Call (325) 225-5429 for a drainage assessment.
Yes, if the line and color are still in production. We keep common Dublin Cobble colors in stock locally. If the color has been discontinued, we will tell you straight rather than patch in a near-match that will look wrong after UV exposure.
Roof runoff concentrates water in one narrow band, and if the base under that section was not compacted properly or lacks a drainage channel, the clay beneath softens and the pavers settle. Austin’s drought-flood cycles make this even worse because the clay expands and contracts. The fix involves lifting the affected rows, rebuilding the base, and often adding a drainage route so water stops pooling under the pavers.
Yes, and this is where a lot of wall failures start. Austin’s Blackland Prairie clay moves more than most soils, so a level base course, proper drainage aggregate behind the wall, and sometimes a deeper footing are needed beyond the manufacturer’s minimum. We build Melville Wall bases to the lot’s soil reality. The extra base work is cheaper than rebuilding a leaning wall in three years.
Almost always, yes. Pavers are designed to be lifted and re-laid. If the units are still sound, our team lifts them, rebuilds the base with proper depth and drainage, and sets the same pavers back in their original pattern. One example: we pulled up a sunken Catalina driveway in Mueller, added four inches of compacted crushed limestone, re-laid the pavers with fresh joint sand, and the driveway now drains clean even after a Hill Country downpour.
Paver driveways typically run $7,000 – $18,000, paver patios $3,500 – $11,000, and driveway replacement $5,000 – $14,000 depending on square footage, base depth, and access. Repairs run lower. Call (325) 225-5429 for an exact quote. Estimates are free and written.
Book Your Belgard Service in Austin, TX
Tell us what you need. We will give you a written number and a written guarantee before any work starts. Call (325) 225-5429 to schedule your free Belgard estimate in Austin. A live person answers, day or night.
Written by Trevor Nash, Owner at Penhallow Remodeling Austin, serving Austin homeowners for well over a decade. “Tell me what you need, I’ll tell you what it costs, and we’ll go from there.”
