Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Austin Homeowners Choose ViewLux Construction
Penhallow Remodeling Austin provides independent Viewlux service in Austin for skylight and roof window needs, from leak diagnosis and flashing replacement to full unit swaps. We are not affiliated with or authorized by ViewLux. We are a local general contractor whose crew has spent hundreds of hours on ViewLux installations across Austin’s roofs, from Clarksville bungalows to Steiner Ranch moderns, and we know how Central Texas weather beats on these units. If your ViewLux skylight is leaking, fogged, or the vent motor has quit, call (325) 225-5429 for a straight answer and a written price before any work starts.
What separates our ViewLux work from a handyman with a caulk gun is simple. We know the failure modes. We know which parts are worth repairing and which are money wasted. And like every Penhallow job, your ViewLux service comes with a written number before we touch the roof and our 365-Day Done Right Promise in writing. If the repair fails inside a year, we come back and fix it at no charge. That is the whole point of The Kingswell Way, and it has been since 2004.
Why Trust Penhallow Remodeling Austin for Your ViewLux Construction?
Trevor Nash, owner of Penhallow Remodeling Austin, learned construction the hard way: foundations, framing, full kitchen rebuilds. He started at Los Angeles Trade-Technical College and spent years swinging a hammer before he ever wrote an estimate. That background matters when we are on your roof looking at a ViewLux curb-mounted skylight that has been leaking for two seasons. We know what the flashing should look like. We know what Austin hail does to it. And we know the difference between a gasket that can be replaced and a unit that should be retired.
Our technicians see ViewLux skylights weekly, not occasionally. That means we recognize the subtle signs: the weeping gasket that only leaks during wind-driven rain, the solar vent motor that runs only in direct sun, the condensation between panes that signals a failed seal. We source genuine ViewLux flashing kits, gaskets, and operators when they are available. When a part is discontinued, we do not guess. We use proven aftermarket equivalents that match the original geometry, so the repair holds.
Every ViewLux job gets the same treatment as a full kitchen remodel: background-checked, uniformed technicians, a written price before work starts, and a written guarantee on the repair. That is not marketing language. That is the operating standard Trevor built the company on: “Tell me what you need, I’ll tell you what it costs, and we’ll go from there.”
Styles & brands we work with
Common ViewLux Construction Problems We Fix in Austin
Austin’s climate is hard on skylights. Intense UV, hail, tree sap, and drought-flood cycles work on seals and flashing year after year. Here are the five ViewLux problems we see most often:
- Flashing corrosion on curb-mounted units. ViewLux VCE curb-mounted skylights sit on a raised curb, and the flashing is the first thing to fail. After hail impact or years of heavy tree sap accumulation on low-pitch Austin roofs, the flashing corrodes and lifts at the corners. Water finds its way under and streaks the ceiling below. We remove the damaged over-flashing, install a new ViewLux flashing kit with butyl tape over the curb, and re-bed the surrounding roofing material.
- Weeping gasket shrinkage on VSE fixed skylights. The gasket around the glass panel on ViewLux VSE fixed skylights shrinks over time in Austin’s heat. The result is a slow leak that only shows up after long, wind-driven rain events. It is easy to misdiagnose as a roof leak. We check the gasket first, because we have seen this exact pattern dozens of times in neighborhoods from East Austin to Round Rock.
- Solar vent motor failure in VSE Solar units. The vent motor on a ViewLux VSE solar-powered venting skylight fails for two reasons: dust ingress into the motor housing or a dead backup battery. The skylight vent stops opening, or opens only in direct sunlight. We replace the motor or battery, clean the housing, and test the full vent cycle before we leave.
- Condensation between panes in older Sun Tunnels. If you see fogging between the panes of a ViewLux Sun Tunnel, the argon seal has failed. Austin’s temperature swings, from freezing winter mornings to 100-degree afternoons, stress the seal until it cracks. This cannot be wiped clean; it is a failed unit. We replace the diffuser or the tunnel section, depending on the model year.
- Leaks at the roof deck on standing seam metal roofs. ViewLux skylights integrated with standing seam metal roofs present a specific challenge. The flashing must match the seam profile, and a generic flashing will fail. We work with standing seam profiles regularly and use the correct ViewLux flashing kit for the roof, not an improvised patch.
ViewLux Parts & Our Repair-vs-Replace Approach
We order genuine ViewLux flashing kits, gaskets, and operators whenever they are in production. For discontinued Sun Tunnel diffusers or obsolete vent motors, we use aftermarket equivalents that match the original geometry. We do not stock cheap universal parts and hope they fit. We keep common ViewLux flashing kits and gaskets on hand for Austin’s most popular models, which means most leak repairs happen in one visit.
The honest math matters here. A VSE skylight with a failed gasket, a dying motor, and aging glass might need $1,200 in separate repairs. A new curb-mounted ViewLux unit might run $1,800 installed and carry a fresh warranty. We give you that cost comparison in writing before you decide. We do not push replacement when a gasket swap fixes the problem for years. We also do not patch a unit that will fail again next spring. Call (325) 225-5429 and we will give you the straight numbers.
Our ViewLux Service Process – Step by Step
- 1
Diagnosis. We inspect the skylight from the roof and, when needed, from inside the attic or ceiling. We look at the flashing, the gasket, the glass condition, and the vent operation if applicable. We use an infrared moisture meter to check the roof decking around the curb. You get a written diagnosis with photos, not a verbal guess.
- 2
Written price. Before any work starts, you get a written price. Not a range, not a ballpark. A number you can hold us to. If the scope changes because we find hidden damage, we stop and discuss it with you before proceeding.
- 3
Repair or replacement. We install genuine ViewLux parts or proven aftermarket equivalents. For leak repairs, we remove the old flashing, clean the curb, and install the new kit with butyl tape and proper fasteners. For replacements, we remove the old unit, inspect the curb and roof deck, and install the new skylight to manufacturer specifications.
- 4
Testing and cleanup. We water-test the repair when possible, cycle any vent motors, and verify the seal. We leave the roof and the interior cleaner than we found it. That is a Kingswell standard, not a courtesy.
- 5
Written warranty. Every ViewLux repair gets a written guarantee. If the repair fails inside the warranty period, we return and fix it at no charge. That is the 365-Day Done Right Promise, and it is in writing on every job.
See the difference
Before
After
Before
After
Before
AfterViewLux Products We Service & Install in Austin
We work on the full ViewLux skylight line commonly installed across Austin and nearby areas, including Viewlux service in Cedar Park. That includes ViewLux VSE fixed skylights, VCE curb-mounted skylights, VSE solar-powered venting skylights, and ViewLux Sun Tunnels. We stock flashing kits and gaskets for the most common VSE and VCE models, which lets us complete most leak repairs in a single visit. For less common Sun Tunnel diffusers and older vent motors, we order parts directly and keep you informed on the timeline. If you are replacing an aging unit, we can also discuss whether a new solar venting model or a fixed unit makes more sense for your roof orientation and attic ventilation needs.
We Also Service These Brands
Penhallow Remodeling Austin is not a single-brand shop. Alongside ViewLux, we work with KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler fixtures. That multi-brand experience means we understand how your skylight integrates with the rest of the house, not just as an isolated unit on the roof.
FAQs – ViewLux Construction Service in Austin
No. Penhallow Remodeling Austin is an independent ViewLux service provider and we are not affiliated with or authorized by ViewLux. We service ViewLux skylights using genuine ViewLux parts when available and proven aftermarket equivalents for discontinued components. Your ViewLux manufacturer warranty is not affected by independent service unless the repair itself causes damage, which our written guarantee covers.
We source genuine ViewLux flashing kits, gaskets, and operators when they are in production. For discontinued parts, like older Sun Tunnel diffusers or obsolete vent motors, we use aftermarket equivalents that match the original geometry. We do not use universal parts that require modification to fit. Call (325) 225-5429 if you want to know what part your specific model needs.
Most flash leak repairs and gasket replacements take two to four hours on the roof. Full skylight replacements are typically completed in half a day. Solar vent motor replacements take about an hour. We schedule a defined arrival window and show up when we said we would, and we leave the jobsite clean.
We service and install ViewLux VSE fixed skylights, VCE curb-mounted skylights, VSE solar-powered venting skylights, and ViewLux Sun Tunnels. If you have an older ViewLux unit that is no longer in production, we can often source compatible parts or recommend a replacement that fits the existing curb or opening.
Independent service does not automatically void a ViewLux manufacturer warranty. What voids a warranty is improper installation or repair that causes further damage. Our repair work is done to specification and carries its own written guarantee, so you have protection either way. We recommend keeping your ViewLux documentation and asking us for a written summary of any repair we perform.
Georgetown Viewlux service and Austin-area skylight repairs typically run between $250 and $3,000 depending on the work. A flashing leak repair runs $600 to $1,800. A full curb-mounted replacement runs $1,200 to $3,000. A solar vent motor replacement runs $350 to $900. A Sun Tunnel diffuser replacement runs $250 to $500. Our written estimate shows each line item, so the number on day one is the number on the invoice. Call (325) 225-5429 for a free estimate and a straight answer.
That is a classic weeping gasket failure. The gasket around the VSE glass panel shrinks over time in Austin’s heat and loses its compression seal. During strong north winds, driven rain is pushed against the weakened gasket and water seeps through. The fix is gasket replacement, not a whole new skylight, unless the glass or curb flashing is also compromised. We will confirm the diagnosis on site and give you a written price. Call (325) 225-5429 to schedule an inspection.
In most cases, just the flashing can be replaced. A Sun Tunnel is a tube with a roof dome and a ceiling diffuser, and the flashing is a separate component at the roof line. If the leak is at the flashing, we replace the flashing and leave the tunnel intact. If the tunnel tube or the roof dome is damaged, we will show you the damage and give you a written price for the specific repair. Call (325) 225-5429 and we will put eyes on it.
That symptom points to a dead backup battery or dust ingress in the motor housing. The VSE Solar vent motor runs on solar power during direct sun and relies on a backup battery for cloudy periods or low light. When the battery dies, the motor only runs while the panel is generating power. When dust clogs the housing, the motor may also overheat and shut down. We replace the battery, clean the housing, and test the full vent cycle. Call (325) 225-5429 for service.
Yes. We work on ViewLux skylights integrated with standing seam metal roofs regularly across Austin. The flashing must match the seam profile, and a generic flashing will fail. We use the correct ViewLux flashing kit for the roof profile and re-secure the seams properly. Our crew also handles standing seam metal roof repair, so we understand how the skylight and the roof work together as one system.
Condensation between the panes of a VSE fixed skylight means the argon seal has failed. Austin’s temperature swings gradually crack the seal until moisture gets between the glass. This cannot be wiped clean from the inside. The fix is glass replacement or, depending on the age and condition of the unit, full replacement. We will give you both numbers in writing. Call (325) 225-5429 and we will come take a look.
Book Your ViewLux Service in Austin, TX
If your ViewLux skylight is leaking, fogged, or the vent motor has stopped, call (325) 225-5429. We will give you a straight diagnosis, a written price, and a defined arrival window. That is how Penhallow Remodeling Austin has worked since day one, and that is how we will work for you.
Written by Trevor Nash, Owner at Penhallow Remodeling Austin, serving Austin since 2004.
