Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Austin Homeowners Choose CWS Construction
We’re an independent CWS repair in Austin provider, and we repair, reface, and install CWS cabinetry in kitchens and bathrooms across the city. Most of the CWS jobs we take on involve thermofoil delamination, hinge cup failures, or sink-base water damage; we fix the specific failure without selling you a full kitchen replacement you don’t need. If you’ve got CWS cabinets that are peeling, sagging, or swollen, call (325) 225-5429 and we’ll give you a written price before any work starts.
We’re not affiliated with or authorized by CWS. We’re a local Austin remodeling company that has spent years working inside CWS-built homes, and we know these cabinets well enough to tell you when a repair makes sense and when a full replacement is the honest answer. Our crews see CWS products in East Austin pier-and-beam bungalows, 1980s slab-on-grade houses near South Congress, and new construction out in Circle C. The climate here, with its hard water and humidity swings and drought-flood cycles, creates specific failure patterns in CWS cabinets that General Contractor services from a typical handyman won’t recognize. We do.
Why Trust Penhallow Remodeling Austin for Your CWS Construction?
Trevor Nash, the owner here at Penhallow Remodeling Austin, learned construction fundamentals at Los Angeles Trade-Technical College and spent years on foundation repairs and full kitchen rebuilds before bringing his crew to Austin. When we walk into a kitchen with CWS cabinets, we know what we’re looking at. Wellborn Estate and Wellborn Premier lines, CWS architectural-grade plywood boxes, Oxford and Manchester vanity series. Each line has its own hinge geometry, door core material, and finish chemistry, and those details determine whether a repair will hold or fail again in six months.
Our technicians are background-checked and arrive in uniform. We work under the Kingswell standard, which has governed how we operate since 2004: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on every project. The 365-Day Done Right Promise is in writing on every job we do. If a CWS cabinet door we remounted starts to sag or a refaced panel delaminates inside a year, we come back and fix it at no charge. No service call fee, no re-inspection fee. That’s the promise and we hold ourselves to it.
Every job gets a written estimate before we pull a single cabinet or set a single tile. The number you see on day one is the number on the invoice. No verbal ballpark that changes after demo, no change orders that appear out of nowhere. Trevor’s approach has always been simple: “Tell me what you need, I’ll tell you what it costs, and we’ll go from there.”
Styles & brands we work with
Common CWS Construction Problems We Fix in Austin
- Thermofoil peeling on older CWS cabinet doors. Austin’s long summer AC season drops indoor humidity low enough that the thermofoil layer on MDF-core CWS doors starts to delaminate at the corners and edges. This is the most common CWS failure we see in Austin. The thermofoil lifts, the MDF underneath shows, and the door looks wrecked even though the cabinet box is still sound. We can often reface or replace just the doors while saving the boxes.
- Drawer slide sag and roller wear on CWS undermount slides. In rental kitchens and family kitchens in Austin, CWS drawers take a beating. The undermount slides wear at the roller tracks, and drawers start to scrape or sit crooked. We replace the slides with OEM CWS hardware when we can get it fast, or a quality aftermarket slide with the same mount pattern when backorders are too long. Either way, the drawer closes square again.
- MDF swelling at sink base cabinets. Slow leaks under CWS-supplied faucets or supply lines in Austin kitchens and bathrooms wick into the MDF toe kick and side panels. The panels swell and crumble. We cut out the damaged section, rebuild the base with a waterproof substrate (the moisture-resistant layer that sits under the cabinet), and remount the cabinet so it’s flat and stable. If the box is swollen past flatness, we tell you honestly and quote a replacement.
- Hinge cup loosening on CWS soft-close hinges. CWS soft-close hinges pull out of particleboard doors, especially in bathrooms where doors get opened dozens of times a day. The hinge cup chews through the core and the door hangs loose. We drill out the damaged cup, epoxy-fill the hole, and remount a stronger hinge with a backplate. Then we adjust every other hinge on that run so the same failure doesn’t spread.
- Delamination and frame separation on CWS vanity cabinets. Austin’s humidity swings, especially in older pier-and-beam homes in East Austin, cause CWS vanity cabinet frames to expand and contract. The panel joints separate and the cabinet starts to rack. We reglue and clamp the frame, replace any swollen panels, and re-set the vanity so it sits level on the floor. For older vanities with 1920s-40s pier-and-beam foundations, we also check the subfloor for moisture before we touch the cabinet.
CWS Parts & Our Repair-vs-Replace Approach
We use OEM CWS hinges, drawer slides, and replacement doors whenever they can be sourced quickly. But we won’t wait six weeks for a backordered CWS door if a quality aftermarket panel matches the finish and grain. We’ll tell you honestly what the lead time looks like and what your options are before any work starts.
For cabinets with widespread thermofoil failure or water damage, we often recommend refacing the boxes we can save rather than full replacement. Refacing keeps the existing cabinet structure and replaces the doors, drawer fronts, and veneer. It’s less expensive than a full gut and the results last. But if the boxes are swollen beyond flatness or the particleboard has turned to mush, no amount of refacing will fix it. We’ll tell you that too, and we’ll price a replacement that fits your kitchen.
We stock common CWS-compatible hinges, drawer slides, and mounting hardware locally in Austin so we don’t have to stop a job waiting on a part. If you need a single CWS door replaced, call (325) 225-5429 and we’ll match the finish as closely as the material allows.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We inspect every CWS cabinet in the room, not just the one you called about. We check hinge cups, drawer slides, toe kicks, sink bases, and door alignment. We write down what we find and tell you what needs fixing now, what can wait, and what’s cosmetic.
- 2
Written repair or reface plan. Before any work starts, you get a written price covering every line item. That includes parts, labor, and any substrate repairs under sink bases or vanity cabinets. The written price is the price. No surprises.
- 3
Repair or installation. We remount hinges, replace slides, reface doors, rebuild sink bases, and install new CWS cabinet runs or vanities. We use the right substrate (the moisture-resistant layer behind tile and under cabinets) so water doesn’t come back through the same spot.
- 4
Adjustment and test. Every door gets aligned, every drawer gets cycled a dozen times, every soft-close hinge gets adjusted so it closes without slamming. We test for square, plumb, and level before we call the job done.
- 5
Written warranty and cleanup. You get a written guarantee covering the work. If anything fails inside the 365-Day Done Right Promise period, we come back and fix it at no charge. We leave the job site cleaner than we found it, which is the Kingswell standard, not an exception.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Austin
We work on CWS Wellborn Cabinet lines including Wellborn Estate and Wellborn Premier, CWS Cabinetry direct cabinet lines used in production homes, CWS Oxford and Manchester vanity series, and CWS architectural-grade plywood box cabinets in flat-panel and shaker styles. We service existing installations and install new CWS cabinets for kitchen remodels, small kitchen remodels, and bathroom renovations. We stock common CWS-compatible hinges, drawer slides, and mounting hardware in our CWS repair in Cedar Park shop for faster turnaround on repairs. For cabinet refacing, we carry finish-matched panel options that work with the existing CWS boxes so you don’t have to replace the whole kitchen.
We Also Service These Brands
CWS is one brand we know deeply, but it’s not the only one. We also install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. If your Austin kitchen has a mix of brands, one crew can handle all of it. That means one written price, one warranty, and one company to call if anything fails.
FAQs – CWS Construction Service in Austin
No. We are an independent CWS service provider in Austin, not an authorized or manufacturer-affiliated service center. We repair and install CWS products based on years of hands-on experience with these cabinets in Austin homes, not on any manufacturer authorization. The benefit to you is that we’re not tied to CWS’s part supply chain or warranty process; we make decisions based on what’s actually best for your kitchen and your budget.
We use OEM CWS hinges, drawer slides, and replacement doors whenever they can be sourced quickly in Austin. When CWS parts are backordered or discontinued, we use quality aftermarket components that match the mount pattern and finish. We always tell you which option we’re using and why, before any work starts. If you have a specific preference for OEM-only parts, we’ll work with that, but it may add lead time. Call (325) 225-5429 and we’ll check current CWS part availability for your job.
Most single-cabinet repairs, hinge replacements, or drawer slide fixes take half a day to a full day. A full kitchen cabinet reface typically runs three to five working days depending on the number of doors and drawer fronts. Full CWS cabinet installation as part of a kitchen remodel runs one to two weeks depending on scope. We’ll give you a written schedule with a defined arrival window before the job starts, and we show up when we said we would.
We service CWS Wellborn Cabinet lines including Wellborn Estate and Wellborn Premier, CWS Cabinetry direct cabinet lines, CWS Oxford and Manchester vanity series, and CWS in Georgetown architectural-grade plywood box cabinets in flat-panel and shaker styles. If you’re not sure which CWS line you have, take a photo of the cabinet interior label or hinge stamp and we’ll identify it during the free estimate visit.
Repairs we perform do not void a CWS manufacturer’s warranty, but we are not a warranty service provider for CWS and we don’t process CWS warranty claims. If your cabinets are still under CWS manufacturer warranty and the failure is covered, you may want to pursue the claim first. If the warranty has expired, or if the failure is from wear, water damage, or installation issues rather than a manufacturing defect, our repair or reface work is the practical option. We’ll tell you which path makes more sense before you spend a dollar.
CWS cabinet repair in Austin varies by what’s actually wrong. Hinge repairs and drawer slide replacements are typically under $400. Refacing a typical kitchen runs $4,000 to $13,000 depending on the number of doors, drawer fronts, and panel material. New CWS kitchen cabinet installation runs $4,000 to $13,000 for a standard layout. Vanity cabinet installation runs $800 to $3,000. Here’s a line-item breakdown:
| CWS Service | Austin Price Range |
|---|---|
| CWS cabinet door hinge repair | Typically under $400 |
| CWS cabinet refacing (typical kitchen) | $4,000 – $13,000 |
| CWS kitchen cabinet installation | $4,000 – $13,000 |
| CWS vanity cabinet installation | $800 – $3,000 |
Call (325) 225-5429 for an exact quote on your CWS cabinets. Estimates are free and the written price is what you pay.
We can match the finish on most CWS cabinet lines closely, but exact matching depends on the age of the cabinet and how much the existing finish has faded from Austin sun exposure. Wellborn and CWS cabinet finishes shift over time, especially in kitchens with south-facing windows. We’ll bring finish samples to your estimate visit and match against a door or drawer front you already have. For older lines with discontinued finishes, we’ll get you as close as the material allows and show you the difference before we order anything.
Thermofoil peeling at the corners on older CWS cabinet doors can sometimes be cleaned and re-adhered, but the repair rarely holds in Austin’s low-humidity summer AC season. The thermofoil has already begun to delaminate from the MDF core, and re-gluing the edges usually fails again within a season. The more durable fix is to replace the doors and drawer fronts, either with matching CWS product or a quality aftermarket panel, while keeping the existing cabinet boxes. That’s a reface. It’s typically less than half the cost of a full kitchen replacement.
CWS cabinets use standard 35mm hinge cup boring and standard drawer slide mount patterns, so we can source compatible hardware from multiple suppliers. The main difference is the grade of the original hinges and slides. CWS soft-close hinges on older lines were often mounted in particleboard doors, which means the hinge cup can pull out even when the hinge itself is fine. We upgrade to stronger backplate-mounted hinges when we repair these, instead of putting the same weak hinge back into the same damaged hole.
If your CWS cabinets are still under manufacturer warranty and the issue is a manufacturing defect, repairs by an independent contractor do not automatically void the warranty, but we are not a warranty service provider for CWS. If the failure is from water damage, heavy wear, or installation issues, the warranty likely doesn’t cover it anyway. We’ll help you figure out whether a warranty claim makes sense before we quote any repair work.
If the sink base cabinet box is still flat and the damage is limited to the toe kick or bottom panel, we can cut out the swollen MDF, rebuild the base with a waterproof substrate, and remount the cabinet. We also check the supply lines and faucet connections for the slow leak that caused the damage in the first place, so the repair doesn’t fail again. If the box has swollen past flatness or the particleboard has turned to mush, a full sink base replacement is the honest recommendation. We’ll show you the damage and tell you which option applies.
Book Your CWS Service in Austin, TX
If you’ve got CWS cabinets that are peeling, sagging, swollen, or just not closing right, call Penhallow Remodeling Austin at (325) 225-5429. We’ll schedule a free estimate, inspect the cabinets, and hand you a written price before any work starts. The 365-Day Done Right Promise covers every CWS job we do.
Written by Trevor Nash, Owner at Penhallow Remodeling Austin, serving Austin homeowners for well over a decade.
